Nozzle and Extrusion Settings:

Retraction and Movement:

• Retraction: Disabled or OFF

• Coast at End: 0.20mm

• Wipe Nozzle Distance: 2.00mm

• Default Printing Speed: 30.0mm/s

• X/Y Movement Speed: 80.0mm/s

• Z Axis Movement Speed: 16.7mm/s

Bridging:

• Unsupported area threshold: 50.0 sqmm

• Extra inflation distance: 0.00mm

• Bridging extrusion multiplier: 100%

• Bridging speed multiplier: 100%

Filament Properties:

• Filament Diameter: 1.7500mm

• Filament Density: 1.25 grams/cm^3

Advanced Settings:

• External Thin Wall Type: Perimeters Only

• Internal Thin Wall Type: Allow Gap Fill

• Allowed Perimeter Overlap: 10%

• Minimum Extrusion Length: 1.00mm

• Minimum Printing Width: 50%

• Maximum Printing Width: 200%

• Endpoint Extension Distance: 0.20mm

• Tool Change Retraction Distance: 12.00mm

• Tool Change Extra Restart Distance: -0.50mm

• Tool Change Retraction Speed: 10.00mm/s

Other Important Checkpoints:

• Allow zeroing of extrusion distances (i.e. G92 E0).

• Ensure firmware supports "sticky" parameters.

• Adjust printing speed for layers below 15.0 sec.

• Enable only retraction when crossing open spaces, force retraction between layers, and only wipe extruder for outer-most perimeters. Please make sure you avoid crossing the outline for travel movements.

Starting Script:

Ensure that your starting script includes the following commands for optimal results: